Sovol Zero Macro Additions + orca presets

For more information about this project please watch the video where I demo them and their installation: Sovol Zero Software Tips & Tricks: Orca Setup Guide, Klipper Macro Kit, Input Shaper / Heating Tests

1) Orca Slicer presets

If you are having difficulty adding Sovol printers to your existing Orca Slicer installation, you are welcome to try my presets, which appear under a slightly modified company name "Sovol3D".

I went inside every file and update all the internal references and re-created these presets that don't interfere with the stock Sovol ones.

Please see the settings section below on how to install them.

2) Mini screen additions

• Shutdown command under "Advanced" on the mini screen: it will turn on the fans to cool the nozzle below 70°C, then shut down Klipper before prompting you to turn off the device. Using this will supposedly reduce the chance of EMMC corruption due to interrupted memory card activities.
• Bed temperature setting under "Prepare", and also the heat soak variant, which will also move the toolhead near the bed - which was more important for the inductive probe of the SV08.
• Z-height information during printing; it’s found under "Tuning" in case you need to check how far you are into a print on the mini screen itself.
• The last added command will save your z-offset adjustment at the end of your print. This is less crucial than on the SV08, since I never needed to adjust z-offset on the Zero; preprint calibrations have been spot on. Someone asked for a first layer test like this - just look at it! But if you ever need to adjust the z-offset and want to save it, you can use this command. Just be sure to change your End-print g-code to END_PRINT_G.

Installing Sovol3D Orca Presets:

1. Download the zip named ZeroOrcaV1.zip (with the highest version number)
2. extract its content into the folder C:\Program Files\OrcaSlicer\resources\profiles on Windows (and probably a similar folder on Macs – I don’t use anything Apple),
3. Next time you open Orca, the printer selection list will now include the Zero.

Installing the macros:

1. Make a backup of all your config files: You can highlight all and download them directly from the Mainsail interface, but only in your web-browser. Download might not yet work on the Device page of Orca.
2. Download the zip named GP3D_Macro_V1.zip (with the highest version number)
3. Extract the file GP3D_Macro.cfg into a temporary location on your computer.
4. Drag and drop the file over the "Machine" page of Mainsail open in your browser or slicer.
5. Add the following include line to your printer.cfg, right below all the other include lines: [include GP3D_Macro.cfg] Make sure to follow exact capitalization, spaces, underline characters, square brackets. Best to copy / paste from here!
6. Save and restart