Otis, the Flexi Otter - Magnetic Hand-Holding Companion

Say hello to our first Flexi-project—the Flexi Otters! 🦦 These hand-holding cuties are not just adorable but thoughtfully designed with makers in mind. After multiple iterations, I’m excited to share this delightful design with you. Whether you’re printing for fun, a gift, or a project to show off, these otters are sure to bring smiles.

Features

• Magnetic connection: Built-in holes for 5x3mm magnets (2 pcs per otter), so they can hold hands like real otters!
  
• Eco-friendly design: Separate pieces for the eyes and mouth mean no AMS needed, minimizing waste. Belly was painted with white acrylic paint
  
• Easy assembly: Glue-in magnets and facial details for a hassle-free experience.
  
• Perfect size: Each otter measures approximately 90mm—ideal for desks, shelves, or gifting.
  
• Multicolor version: A vibrant option for those looking to add more personality and flair to their otters.
• Keychain version: Due to popular request, we added a keychain verison as well Hardware used:
• 5x3mm Magnets: https://amzn.to/4konnko
• Bindering 12mm: https://amzn.to/40DvH7G
• 25mm Schlüsselring: https://amzn.to/4hlK5Hx

Important Disclaimer:

While we've playfully experimented with giving our Flexi-Otters a little warm water adventure, please note that submerging them—even briefly—is not generally recommended. These adorable 3D-printed otters can eventually allow water to seep in, so if you do decide to give them a dip, make sure the adventure is short and that you dry them thoroughly afterward.

Filament Used

• GIANTARM PLA Wood Black Walnut: Check it out here
  

Print Time

• Approximately 1 hour (0.12mm Layer Height)
  

Assembly Notes

• Magnets and facial pieces are designed to fit snugly with a small amount of glue.
  
• No additional tools required—just a bit of patience and creativity!
  

Ideal Use

Perfect as a desk accessory, shelf decoration, or heartfelt gift for animal lovers and 3D printing enthusiasts.

Start printing today and add a touch of otterly adorable charm to your collection! 🦦✨

Date:
10.12.2024

Version 1.0 # Initial version

Version 1.1 # Multicolor Version Added

Version 1.2 # added a keychain version as well

Version 1.2 # added a single Color keychain version as well

Version 1.3 # updated 3MF Files

Added Files Documentation

• 1_flexiOtter_multicolor_both_versions.3mf: Bambustudio 3MF File, for Multicolor Print, includes both versions with correct settings, ready to print
• 1_flexiOtter_multicolor_keychain.stl: STL File, with keyhole you need to Slice it yourself
• 1_flexiOtter_multicolor_without_keychain.stl: STL File,without keyhole you need to Slice it yourself
• 2_flexiOtter_singlecolor_both.3mf: Bambustudio 3MF File,includeds both versions, with correct settings, ready to print
• 2_flexiOtter_singlecolor_eyes_nose.stl: STL File,Eyes and Nose, you need to glue in, you need to Slice it yourself
• 2_flexiOtter_singlecolor_keychain.stl: STL File,has a keyhole, you need to Slice it yourself
• 2_flexiOtter_singlecolor_without_keychain.stl: STL File,has no keyhole, you need to Slice it yourself

print at 0.12mm layerheight
3 walls
5 top / bottom layers